USB-IF Certification Validation Test (Device)

This test checks the USB Implementers Forum (USB-IF) test ID that is provided after a device passes the USB-IF test.

Note  

For a white paper about the Hardware Certification Kit (HCK) USB Implementers Forum (USB-IF) testing requirements, see Windows Hardware Certification Kit USB-IF Testing.

 

Test details

Associated requirements

Device.Connectivity.UsbDevices.UsbifCertification

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

In addition, this test requires the following:

  • The USB-IF ID value of your test device or the self-test logs for the device. You must set these parameters when you schedule this test. See the More information section for details.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.

More information

Parameters

Parameter Description

TEST_ID

The USB IF test ID.

PATH_TO_LOGS

If you do not specify a path to the log file, you must create the folder C:\USBLogs.

INTEROP_TESTS_PASSED

Confirms that the USB IF Interoperability tests ran and passed.

 

 

 

Send comments about this topic to Microsoft